|
STEP 1.) Set
up your Dreamcast according to the Owner's Manual. Make sure your Dreamcast is
plugged directly into a Phone Jack (do not use any type of splitter).
|
|
STEP 2.) Insert
the Dreamcast Web Browser. You can use any version of the Dreamcast Web Browser
to change ISP information. If you do not have a Dreamcast Web Browser, please
contact Sega for a replacement.
|
STEP 3.) Press
the POWER button to turn on your Dreamcast. You should see the Dreamcast Intro
and Sega License Screens, followed by the Planet Web Splash Screen. If not
enough free memory blocks are available in your VMU, or if you don't have a VMU
installed, you'll see the following screen:
Info There are not enough free memory blocks. 3 empty blocks are required for
saving. If the Web Browser is started, saving will not be possible.
Select OK to advance past this screen.
|
|
STEP 4.) Press
the START button on your controller.
|
|
STEP 5.) Choose
Options from the menu cluster.
|
STEP 6.) Under
Required Settings, select INTERNET CONNECTION.
|
STEP 7.) On
the Basic Info Screen, fill out the following info: Your Real Name: (this is
not required) User Login: (either your ISP account username or full e-mail
address - username@valueconnect.net) Password: (your ISP account password)
Dialup Number: (your ISP will provide you with the access number closest to
you) Backup Number: (optional, but recommended. Ask your ISP for this.) DNS 1:
216.151.83.45 DNS 2: 216.151.83.55
|
STEP 8.) Next,
fill out the Dial Options Screen: Area code you are dialing from: (required for
users who need to dial an area code with their dialup number) Long distance
call prefix: (not required - usually "1" if needed) Call waiting prefix: (not
required - usually "*70" if needed) Outside dialing prefix: (not required -
usually "9" if needed) Modem init AT&F (don't change this - use default value:
ATR&F0) Dial: Tone or Pulse (default "Tone") Dial area code: On or Off (default
"Off") Blind Dial: On or Off (default "Off." Select "On" only if you have
voicemail on your phone that causes a beep when you pick it up.)
|
STEP 9.) Finally,
fill out the Proxy Settings Screen (if your ISP requires further details) Use
Proxy: Y or N Proxy Server Name: (default: blank) Proxy Port: (default: blank)
|
STEP 10.) Once
all your changes have been completed, select OK. On the Required and Optional
Settings Screen, select SAVE to save all changes to the Dreamcast system
memory. DO NOT RESET OR POWER OFF YOUR DREAMCAST AS SETTINGS ARE BEING SAVED.
|
|
