STEP 1.) Start
from your Desktop and Click on the Apple in the Upper-Left Corner. Go down to
Control Panels and Select PPP.
|
STEP 2.) Enter
your Value Connect User Name for Name, your Password and your Value Connect
Local Access Number.
|
STEP 3.) Click
on the PPP Drop-Down Menu and Select TCP/IP. (Note: The PPP Control Panel must
be the active window in order to see the PPP menu.)
|
STEP 4.) In
the TCP/IP window, make sure of the following 4 settings: Connect via: is set
to PPP. Configure: is set to Using PPP Server. Name Server Addr: is set to
216.151.83.45 and 216.151.83.55 Additional Search Domains can be blank or have
valueconnect.net in it. Close out of this window and Save Your Changes.
|
STEP 5.) Click
on the PPP Drop-Down Menu and select Modem. (Note: The PPP Control Panel must
be the active window in order to see the PPP menu.)
|
STEP 6.) In
the Modem Window, make sure of the following 2 settings: Connect via: The
correct port must be selected. Typically this would be the Modem Port or
Internal Port, depending upon the type of modem and how it is connected. Modem:
The correct type of modem needs to be selected. Most likely the one that is
selected already is correct, but if you know for sure that you have a different
modem, select one from the list that most closely matches yours. Close out of
this window and Save Your Changes.
|
STEP 7.) On
the PPP Control Panel, click the Options Button.
|
STEP 8.) On
the Options Window, make sure the Connection Tab is selected. Check the Box
labels "Connect automatically when starting TCP/IP applications." Press OK.
Setup is now complete, just click connect to dial.
Return to top of this page
|
|
